কিভাবে অফ লাইনে without সফটওয়্যার IP পরিবর্তন করা যায়?
• Start Menu –> Run –> cmd লিখে এন্টার করুন।
• তাহলে কমান্ড প্রোম্পট উইন্ডো খুলবে।
• এবার নিচের কোডটি লিখে এন্টার করুন।
ipconfig /release
• এবার নিচের কোডটি টাইপ করে এন্টার চাপুন।
exit
• এবার আপনার ডেক্সটপ থেকে “Network Places” বা “My Network Places” এর উপর মাউসের রাইট বাটন ক্লিক করুন।
• এবার মেনু থেকে “properties” এ ক্লিক করুন।
• তাহলে একটি নতুন উইন্ডো খুলবে, এটার নাম “Local Area Connection” হতে পারে।
• এবার এখান থেকে “Local Area Connection” এর রাইট বাটন ক্লিক করে “properties” এ ক্লিক করুন।
• এবার “General” ট্যাবে ক্লিক করুন।
• আপনি একটি তালিকা পাবেন, এখান থেকে “Internet Protocol (TCP/IP)” এর উপর ডাবল ক্লিক করুন।
• এবার এখান থেকে “Use the following IP address” এ ক্লিক করুন।
• এবার আপনার ইচ্ছা মতো একটি IP Address দিন।
• এবার কী-বোর্ড থেকে “Tab” কী তে ক্লিক করুন। তাহলে “Subnet Mask” বক্সটি স্বয়ংক্রিয়ভাবে পূরণ হয়ে যাবে।
• এবার OK, OK করে বেরিয়ে আসুন।
এবার আপনি “Local Area Connection” এ চলে আসবেন।
• আবারও “Local Area Connection” এ রাই্ট বাটন ক্লিক করে properties এ ক্লিক করুন।
• এবার “TCP/IP” সেটিং এ যান আবারও।
• এবার “Obtain an IP address automatically” এটি সিলেক্ট করুন।
• এবার Ok, Ok করে বেরিয়ে আসুন।
• এখন নতুন IP দিয়ে কাজ করুন।
How to change IP software without off-line?
• Start Menu -> Run -> cmd and press Enter.
• If the command prompt window will open.
• Please enter the code below.
ipconfig / release
• Now type the following command and press Enter.
exit
• From the desktop to your "Network Places" or "My Network Places", right click on the mouse.
• From the menu "properties" click.
• If you open a new window, its name is "Local Area Connection" may be.
• From the "Local Area Connection" and right-click "properties" click.
• The "General" tab.
• You will receive a list, from the "Internet Protocol (TCP / IP)" and double-click on.
• From the "Use the following IP address" and click on.
• Now is your day like an IP Address.
• From the keyboard "Tab" key and click. If the "Subnet Mask" box will be filled in automatically.
• Now OK, OK, come out.
Now "Local Area Connection" will run.
• Again, "Local Area Connection" and click on the properties button on the raita.
• The "TCP / IP" go to the settings again.
• The "Obtain an IP address automatically" and select it.
• Now Ok, Ok come out.
• Work with the new IP.
|