জাভা ফোনের পারমিশন HACK এর পদ্ধতি
জাভা ফোনের পারমিশন HACK এর পদ্ধতি ।(apps ব্যবহার করার সময় যে yes চাপতে হয়)
১) প্রথমে আপনার PC\'তে > J.A.F 1.98.62.exe
এবং
>OGM JAF PKEY Emulator v5.exe নামের Software-২টি নামিয়ে নিন।
২) Pc Suite দিয়ে PC\'র সাথে ফোন কানেক্ট করুন। কানেক্ট সম্পন্ন হলে PC suite এ file গিয়ে >exit করুন ।
৩)প্রথমে J.A.F অপেন (install) করুন, একটা error আসবে ।তারপর OGM JAF PKEY Emulator open করুন। ডান দিকে GO তে click করুন। done হলে J.A.F এর BB5 নামের ট্যাবে যান।
৪) নিচের অপশন গুলোতে টিক দিনঃ
i) Read pp
ii) Normal Mode
iii) CRT 308 (¡¡,¡¡¡ এ আগে থেকেই টিক দেয়া থাকবে)
৫) Service -এ ক্লিক করুন।
৬) একটি _________.pp ফাইল পাবেন।এটিই main.
(যদি .pp ফাইলটি না পান তবে ফোনটি restart দিন এবং পুনরায় connect করুন এবং একই ভাবে চেষ্টা করুন) এই .pp ফাইলটি ডেস্কটপ- এ সেভ করুন।
৭) .pp ফাইলটি Notepad এ অপেন করুন। ফাইলটি open করলে এমন দেখতে পাবেন (আমার নোকিয়া 2700এ আমি যেমন পেয়েছিলাম)>
[Product Profile RM-000_000000000000000]
SETS 1
ELEMENTS 3
SET 1
0 31
1 0
2 6
৮) যদি আপনার ফোনটি
- i) s40v3 হয়, তবে "28 1" খুঁজুন এবং একে "28 2" -এ পরিবর্তন করে দিন।
ii) s40v5 / s40v6 হয়, তবে "48" খুঁজুন এবং একে "48 2" - এ
পরিবর্তন করে দিন।
iii) যদি সেখানে "48" /"28" নামের কোন কিছু না থাকে, তবে প্রথম কলামে "48 2" / "28 2" বসিয়ে দিন। (¡¡¡ নং টিই বেশির ভাগ করতে হয়) ( এভাবে edit করতে হয়>
[Product Profile RM-000_000000000000000]
SETS 1
ELEMENTS 3
SET 1
48 2
0 31
1 0
2 6
(SET 1 এর ঠিক নিচের লাইনে দিতে হবে)
৯)edit করা .pp ফাইলটি সেভ করে রাখুন।
১০) J.A.F অপেন করুন এবং BB5 ট্যাবে যান।
১১) নিচে দেয়া নামের অপশন গুলো টিক দিনঃ
i) Upload pp
ii) Normal Modec CRT-308 (আগে থেকেই টিক দেয়া থাকবে)
১২) Service -এ ক্লিক করুন।একটা box আসবে
১৩) একটু আগে edit করে সেভ করা .pp ফাইলটি সিলেক্ট করুন।
১৪) যখন Done শো করবে, তখন "Drop Down Menu" (BBF ট্যাব এ নিচে ডান দিকে) থেকে "Normal Mode" সিলেক্ট করুন।
১৫) ফোন রিস্টার্ট করবে এবং
"Test in RNDIS USB mode?"
,দেখাবে No সিলেক্ট করুন।
এবার আর apps ব্যবহার করার সময় yes চাপতে হবে না ।
এটি করতে পারলে আপনি app minimize ও করতে পারবেন ।
Java Java method calls to the phone's permission HACK HACK permission of the procedure. (Apps when using the press that yes) 1) First, your PC \ 'Find> JAF 1.98.62.exe and> OGM JAF PKEY Emulator v5.exe the Software- Take it down to two. Ii) Pc Suite with the PC \ 's call to connect. When done, connect the PC suite in the file> exit Please. 3) Open the J.A.F (install), and an error in the tarapara OGM JAF PKEY Emulator open. On the right hand side click on GO. J.A.F the name of the tab BB5 done. 4) Check the following options: The groups i) Read pp ii) Normal Mode iii) CRT 308 (¡¡, ¡¡¡have already been checked) 5) Service click. 6) is a _________. Pp file pabenaetii main. (If you do not get .pp file and restart the phone the same way, and try to re-connect) to the .pp deskatapa save the file. 7) .pp Open the file in Notepad. The file open or when you will see (my Nokia 2700 on as I got)> [Product Profile RM-000_000000000000000] SETS 1 ELEMENTS 3 SET 1 0 31 1 0 2 6 8) If your phone - i) s40v3, the "28 1" and in the "28 2" on the day of change. ii) s40v5 / s40v6 If "48" and one in "48 2" - the day of the change. iii) if there is a "48" / "28" in the name is not the first column of the "48 2" / "28 2" putting. (¡¡¡Most of the trips are to No.) (This is to edit> [Product Profile RM-000_000000000000000] SETS 1 ELEMENTS 3 SET 1 48 2 0 31 1 0 2 6 (SET 1 should be just below the line) 9) save the file to edit .pp. 10) J.A.F Open and BB5 tab. 11) Check the options are as follows: The name is given below i) Upload pp ii) Normal Modec CRT-308 (pre-tick will be given) 1) Service box, click the karunaekata 13) to save a little earlier, edit the file, select .pp please. 14) will show Done when the "Drop Down Menu" (BBF tab at the bottom right-hand side) to "Normal Mode" and select. 15) the phone will reboot and "Test in RNDIS USB mode?" , Select No show. And yes I'll need to do when using apps. This app minimize, and if you are able to.
|